Accéder au contenu principal

Produit scalaire dans l’espace — Exercices 01 à 05 | Al Moufid | 2e Bac PC/SVT

Produit scalaire dans l’espace — Exercices 01 à 05

Al Moufid · 2e Bac Sciences Physiques et SVT · page 459

Dans ces exercices, la relation de Chasles et les propriétés du produit scalaire permettent de calculer des longueurs, puis de démontrer des orthogonalités. Pour chaque question, les données sont visibles sans ouvrir la correction.

Exercice 01 — Produit scalaire et longueur

On considère trois points de l’espace \(A,B,C\) tels que \(AB=5\), \(AC=7\) et \(\overrightarrow{AB}\cdot\overrightarrow{AC}=3\).
1) Calculer le produit scalaire \(\overrightarrow{AB}\cdot\overrightarrow{BC}\).
Afficher la correction

La donnée concerne les vecteurs \(\overrightarrow{AB}\) et \(\overrightarrow{AC}\). Pour faire apparaître ces deux vecteurs, on décompose \(\overrightarrow{BC}\) avec la relation de Chasles :

\[\overrightarrow{BC}=\overrightarrow{BA}+\overrightarrow{AC}=-\overrightarrow{AB}+\overrightarrow{AC}.\]

Par bilinéarité du produit scalaire :

\[\begin{aligned}\overrightarrow{AB}\cdot\overrightarrow{BC}&=\overrightarrow{AB}\cdot(\overrightarrow{AC}-\overrightarrow{AB})\\&=\overrightarrow{AB}\cdot\overrightarrow{AC}-\overrightarrow{AB}\cdot\overrightarrow{AB}\\&=3-AB^2=3-25=-22.\end{aligned}\]
Ainsi, \(\boxed{\overrightarrow{AB}\cdot\overrightarrow{BC}=-22}\).
2) Déterminer la distance \(BC\).
Afficher la correction

Comme \(\overrightarrow{BC}=\overrightarrow{AC}-\overrightarrow{AB}\), la formule du carré de la norme d’une différence fournit :

\[\begin{aligned}BC^2&=\|\overrightarrow{AC}-\overrightarrow{AB}\|^2\\&=AC^2+AB^2-2\overrightarrow{AC}\cdot\overrightarrow{AB}\\&=49+25-2\times3=68.\end{aligned}\]

Une distance étant positive, \(BC=\sqrt{68}=2\sqrt{17}\).

\(\boxed{BC=2\sqrt{17}}\).

Exercice 02 — Identité métrique et milieu

Soient \(A,B,C\) trois points de l’espace tels que \(AB=\sqrt3\), \(AC=2\sqrt5\) et \(BC=4\sqrt2\).
1) Déterminer le produit scalaire \(\overrightarrow{AB}\cdot\overrightarrow{AC}\).
Afficher la correction

La relation de Chasles donne \(\overrightarrow{BC}=\overrightarrow{AC}-\overrightarrow{AB}\). On élève les normes au carré :

\[BC^2=AB^2+AC^2-2\overrightarrow{AB}\cdot\overrightarrow{AC}.\]

D’où :

\[\overrightarrow{AB}\cdot\overrightarrow{AC}=\frac{AB^2+AC^2-BC^2}{2}=\frac{3+20-32}{2}=-\frac92.\]
\(\boxed{\overrightarrow{AB}\cdot\overrightarrow{AC}=-\dfrac92}\).
2) On désigne par \(I\) le milieu du segment \([BC]\). Calculer la distance \(AI\).
Afficher la correction

Comme \(I\) est le milieu de \([BC]\), on a :

\[\overrightarrow{AI}=\frac12\bigl(\overrightarrow{AB}+\overrightarrow{AC}\bigr).\]

Cette écriture permet d'utiliser les longueurs connues et le produit scalaire calculé à la question 1).

\[\begin{aligned}AI^2&=\frac14\|\overrightarrow{AB}+\overrightarrow{AC}\|^2\\&=\frac14\left(AB^2+AC^2+2\overrightarrow{AB}\cdot\overrightarrow{AC}\right)\\&=\frac14\left(3+20+2\left(-\frac92\right)\right)=\frac{14}{4}=\frac72.\end{aligned}\]

Comme \(AI\geq0\), on obtient :

\(\boxed{AI=\sqrt{\dfrac72}=\dfrac{\sqrt{14}}2}\).

Exercice 03 — Tétraèdre régulier

\(ABCD\) est un tétraèdre régulier d’arête \(a\), avec \(a>0\). Toutes ses faces sont donc des triangles équilatéraux de côté \(a\).
1) a) Calculer \(\overrightarrow{AB}\cdot\overrightarrow{AC}\) et \(\overrightarrow{AB}\cdot\overrightarrow{AD}\).
Afficher la correction

Les triangles \(ABC\) et \(ABD\) sont équilatéraux. Par conséquent, \(\widehat{BAC}=\widehat{BAD}=60^\circ\) et \(AB=AC=AD=a\).

\[\begin{aligned}\overrightarrow{AB}\cdot\overrightarrow{AC}&=AB\times AC\times\cos60^\circ=a^2\times\frac12=\frac{a^2}{2},\\\overrightarrow{AB}\cdot\overrightarrow{AD}&=AB\times AD\times\cos60^\circ=\frac{a^2}{2}.\end{aligned}\]
\(\boxed{\overrightarrow{AB}\cdot\overrightarrow{AC}=\overrightarrow{AB}\cdot\overrightarrow{AD}=\dfrac{a^2}{2}}\).
1) b) Calculer \(\overrightarrow{AB}\cdot\overrightarrow{CD}\), puis établir que les droites \((AB)\) et \((CD)\) sont perpendiculaires.
Afficher la correction

La relation de Chasles donne \(\overrightarrow{CD}=\overrightarrow{AD}-\overrightarrow{AC}\). En utilisant les résultats de la question 1) a) :

\[\begin{aligned}\overrightarrow{AB}\cdot\overrightarrow{CD}&=\overrightarrow{AB}\cdot(\overrightarrow{AD}-\overrightarrow{AC})\\&=\frac{a^2}{2}-\frac{a^2}{2}=0.\end{aligned}\]

Les vecteurs \(\overrightarrow{AB}\) et \(\overrightarrow{CD}\) sont non nuls, car \(a>0\). Leur produit scalaire est nul : ils sont orthogonaux.

\(\boxed{(AB)\perp(CD)}\).
Dans la suite, \(I\) et \(J\) sont les milieux respectifs de \([CD]\) et \([BC]\), et \(G\) est le centre de gravité du triangle \(BCD\).
2) a) Calculer les produits scalaires \(\overrightarrow{AJ}\cdot\overrightarrow{BC}\) et \(\overrightarrow{JD}\cdot\overrightarrow{BC}\).
Afficher la correction

Comme \(J\) est le milieu de \([BC]\), on dispose de l’égalité :

\[\overrightarrow{AJ}=\frac12(\overrightarrow{AB}+\overrightarrow{AC}),\qquad \overrightarrow{BC}=\overrightarrow{AC}-\overrightarrow{AB}.\]

Par bilinéarité et symétrie :

\[\begin{aligned}\overrightarrow{AJ}\cdot\overrightarrow{BC}&=\frac12(\overrightarrow{AB}+\overrightarrow{AC})\cdot(\overrightarrow{AC}-\overrightarrow{AB})\\&=\frac12(AC^2-AB^2)=0,\end{aligned}\]

car \(AB=AC=a\).

Pour le second produit, on utilise \(\overrightarrow{JD}=\overrightarrow{AD}-\overrightarrow{AJ}\) :

\[\begin{aligned}\overrightarrow{JD}\cdot\overrightarrow{BC}&=\overrightarrow{AD}\cdot(\overrightarrow{AC}-\overrightarrow{AB})-\overrightarrow{AJ}\cdot\overrightarrow{BC}\\&=\overrightarrow{AD}\cdot\overrightarrow{AC}-\overrightarrow{AD}\cdot\overrightarrow{AB}.\end{aligned}\]

Dans les faces équilatérales \(ACD\) et \(ABD\), \(\overrightarrow{AD}\cdot\overrightarrow{AC}=\overrightarrow{AD}\cdot\overrightarrow{AB}=a^2/2\). Donc le dernier résultat est nul.

\(\boxed{\overrightarrow{AJ}\cdot\overrightarrow{BC}=0\quad\text{et}\quad\overrightarrow{JD}\cdot\overrightarrow{BC}=0}\).
2) b) En déduire que les vecteurs \(\overrightarrow{AG}\) et \(\overrightarrow{BC}\) sont orthogonaux.
Afficher la correction

Dans le triangle \(BCD\), \(G\) est le centre de gravité ; il appartient à la médiane issue de \(D\), donc à la droite \((DJ)\). En particulier, \(\overrightarrow{JG}=\frac13\overrightarrow{JD}\).

La relation de Chasles fournit :

\[\overrightarrow{AG}=\overrightarrow{AJ}+\overrightarrow{JG}=\overrightarrow{AJ}+\frac13\overrightarrow{JD}.\]

D’après la question 2) a) :

\[\overrightarrow{AG}\cdot\overrightarrow{BC}=\overrightarrow{AJ}\cdot\overrightarrow{BC}+\frac13\overrightarrow{JD}\cdot\overrightarrow{BC}=0+\frac13\times0=0.\]
Ainsi \(\boxed{\overrightarrow{AG}\perp\overrightarrow{BC}}\).

Exercice 04 — Identité vectorielle

\(A,B,C,D\) sont les sommets d’un tétraèdre.
1) Démontrer que, pour tout point \(M\) de l’espace :\[\overrightarrow{MA}\cdot\overrightarrow{BC}+\overrightarrow{MB}\cdot\overrightarrow{CA}+\overrightarrow{MC}\cdot\overrightarrow{AB}=0.\]
Afficher la correction

On fixe un point \(M\) quelconque. La relation de Chasles permet d'exprimer chaque vecteur reliant deux sommets en fonction des vecteurs d'origine \(M\) :

\[\begin{aligned}\overrightarrow{BC}&=\overrightarrow{MC}-\overrightarrow{MB},\\\overrightarrow{CA}&=\overrightarrow{MA}-\overrightarrow{MC},\\\overrightarrow{AB}&=\overrightarrow{MB}-\overrightarrow{MA}.\end{aligned}\]

Posons \(S\) égal à la somme demandée. En remplaçant puis en développant, on obtient :

\[\begin{aligned}S={}&\overrightarrow{MA}\cdot\overrightarrow{MC}-\overrightarrow{MA}\cdot\overrightarrow{MB}\\&+\overrightarrow{MB}\cdot\overrightarrow{MA}-\overrightarrow{MB}\cdot\overrightarrow{MC}\\&+\overrightarrow{MC}\cdot\overrightarrow{MB}-\overrightarrow{MC}\cdot\overrightarrow{MA}.\end{aligned}\]

Grâce à la symétrie du produit scalaire, chaque terme s'annule avec son opposé. Ainsi \(S=0\). Cette identité est valable pour tout point \(M\) de l’espace.

\(\boxed{\overrightarrow{MA}\cdot\overrightarrow{BC}+\overrightarrow{MB}\cdot\overrightarrow{CA}+\overrightarrow{MC}\cdot\overrightarrow{AB}=0}\).
2) Sachant que \((AD)\perp(BC)\) et \((AC)\perp(BD)\), démontrer que \((AB)\perp(CD)\).
Afficher la correction

La question 1) est vraie pour tout point \(M\). Choisissons \(M=D\) afin d'utiliser les deux orthogonalités données. Elle devient :

\[\overrightarrow{DA}\cdot\overrightarrow{BC}+\overrightarrow{DB}\cdot\overrightarrow{CA}+\overrightarrow{DC}\cdot\overrightarrow{AB}=0.\]

Comme \((AD)\perp(BC)\), on a \(\overrightarrow{DA}\cdot\overrightarrow{BC}=0\). De même, \((AC)\perp(BD)\) implique \(\overrightarrow{DB}\cdot\overrightarrow{CA}=0\).

L’égalité précédente se réduit donc à :

\[\overrightarrow{DC}\cdot\overrightarrow{AB}=0.\]

Les vecteurs \(\overrightarrow{DC}\) et \(\overrightarrow{AB}\) sont non nuls, puisque \(ABCD\) est un tétraèdre. Leurs droites supports sont ainsi perpendiculaires.

\(\boxed{(AB)\perp(CD)}\).

Exercice 05 — Produit scalaire dans un cube

\(ABCDEFGH\) est un cube d’arête \(a>0\). Ses arêtes issues de \(A\) sont \([AB]\), \([AD]\) et \([AE]\).

ABCDEFGHSchéma du cube (perspective non à l’échelle).
1) Montrer que \(\overrightarrow{AE}\cdot\overrightarrow{HF}=0\).
Afficher la correction

Dans le cube, les points \(E,F,G,H\) définissent le plan de la face supérieure \((EFGH)\). L’arête \([AE]\) est perpendiculaire à cette face : elle est donc perpendiculaire à toute droite de ce plan.

Or la droite \((HF)\) est contenue dans le plan \((EFGH)\). Nous avons ainsi \((AE)\perp(HF)\). Les vecteurs \(\overrightarrow{AE}\) et \(\overrightarrow{HF}\) sont donc orthogonaux. D'après la définition de l’orthogonalité :

\[\boxed{\overrightarrow{AE}\cdot\overrightarrow{HF}=0}.\]
2) Démontrer que \(\overrightarrow{EB}\cdot\overrightarrow{HG}=a^2\).
Afficher la correction

Décomposons \(\overrightarrow{EB}=\overrightarrow{EA}+\overrightarrow{AB}\). Dans le cube, \(\overrightarrow{HG}=\overrightarrow{AB}\) et \(\overrightarrow{EA}\perp\overrightarrow{AB}\). Par bilinéarité :

\[\begin{aligned}\overrightarrow{EB}\cdot\overrightarrow{HG}&=(\overrightarrow{EA}+\overrightarrow{AB})\cdot\overrightarrow{AB}\\&=0+AB^2=a^2.\end{aligned}\]
\(\boxed{\overrightarrow{EB}\cdot\overrightarrow{HG}=a^2}\).
3) Calculer \(\overrightarrow{ED}\cdot\overrightarrow{EH}\) en fonction de \(a\).
Afficher la correction

On utilise \(\overrightarrow{ED}=\overrightarrow{EA}+\overrightarrow{AD}\). Or \(\overrightarrow{EH}=\overrightarrow{AD}\) et \(\overrightarrow{EA}\perp\overrightarrow{AD}\).

\[\overrightarrow{ED}\cdot\overrightarrow{EH}=(\overrightarrow{EA}+\overrightarrow{AD})\cdot\overrightarrow{AD}=0+AD^2=a^2.\]
\(\boxed{\overrightarrow{ED}\cdot\overrightarrow{EH}=a^2}\).
4) a) On considère \(O\), centre de la face \(ABCD\). Démontrer que \(\overrightarrow{EO}\cdot\overrightarrow{BF}=-a^2\).
Afficher la correction

Par la relation de Chasles, \(\overrightarrow{EO}=\overrightarrow{EA}+\overrightarrow{AO}\). Le vecteur \(\overrightarrow{AO}\) appartient au plan \((ABCD)\) et est donc orthogonal à \(\overrightarrow{AE}\).

De plus, \(\overrightarrow{BF}=\overrightarrow{AE}\). Par conséquent :

\[\begin{aligned}\overrightarrow{EO}\cdot\overrightarrow{BF}&=(\overrightarrow{EA}+\overrightarrow{AO})\cdot\overrightarrow{AE}\\&=-AE^2+0=-a^2.\end{aligned}\]
\(\boxed{\overrightarrow{EO}\cdot\overrightarrow{BF}=-a^2}\).
4) b) Prouver que \((DF)\perp(HO)\).
Afficher la correction

Pour vérifier l’orthogonalité, calculons \(\overrightarrow{DF}\cdot\overrightarrow{HO}\) à partir de trois vecteurs perpendiculaires issus de \(A\). Notons \(\vec u=\overrightarrow{AB}\), \(\vec v=\overrightarrow{AD}\) et \(\vec w=\overrightarrow{AE}\). Alors \(\vec u\cdot\vec v=\vec u\cdot\vec w=\vec v\cdot\vec w=0\), et \(\|\vec u\|^2=\|\vec v\|^2=\|\vec w\|^2=a^2\).

Par Chasles et parce que \(O\) est le milieu de \([AC]\) :

\[\overrightarrow{DF}=\vec u-\vec v+\vec w,\qquad \overrightarrow{HO}=\frac12\vec u-\frac12\vec v-\vec w.\]

En développant le produit scalaire, tous les produits croisés s’annulent. Il reste :

\[\overrightarrow{DF}\cdot\overrightarrow{HO}=\frac12a^2+\frac12a^2-a^2=0.\]

Ces deux vecteurs étant non nuls :

\(\boxed{(DF)\perp(HO)}\).
Pour la question 5), \(I\) est le milieu de l'arête \([CG]\).
5) Calculer, en fonction de \(a\), les produits scalaires \(\overrightarrow{OI}\cdot\overrightarrow{HF}\) et \(\overrightarrow{OE}\cdot\overrightarrow{FI}\).
Afficher la correction

Reprenons \(\vec u=\overrightarrow{AB}\), \(\vec v=\overrightarrow{AD}\) et \(\vec w=\overrightarrow{AE}\), deux à deux orthogonaux et de norme \(a\).

Les égalités de milieu donnent \(\overrightarrow{AO}=\frac12(\vec u+\vec v)\) et \(\overrightarrow{AI}=\vec u+\vec v+\frac12\vec w\). Donc :

\[\overrightarrow{OI}=\frac12(\vec u+\vec v+\vec w),\qquad \overrightarrow{HF}=\vec u-\vec v.\]

Par bilinéarité :

\[\overrightarrow{OI}\cdot\overrightarrow{HF}=\frac12(\|\vec u\|^2-\|\vec v\|^2)=\frac12(a^2-a^2)=0.\]

D'autre part :

\[\overrightarrow{OE}=-\frac12\vec u-\frac12\vec v+\vec w,\qquad \overrightarrow{FI}=\vec v-\frac12\vec w.\]

En éliminant les produits croisés, qui sont nuls :

\[\overrightarrow{OE}\cdot\overrightarrow{FI}=-\frac12\|\vec v\|^2-\frac12\|\vec w\|^2=-a^2.\]
\(\boxed{\overrightarrow{OI}\cdot\overrightarrow{HF}=0\quad\text{et}\quad\overrightarrow{OE}\cdot\overrightarrow{FI}=-a^2}\).
6) Démontrer que la droite \((AG)\) est perpendiculaire au plan \((CFH)\).
Afficher la correction

Pour prouver qu'une droite est perpendiculaire à un plan, il suffit de montrer que son vecteur directeur est orthogonal à deux vecteurs non colinéaires de ce plan. Choisissons \(\overrightarrow{CF}\) et \(\overrightarrow{CH}\), qui dirigent deux arêtes distinctes du triangle \(CFH\).

Avec \(\vec u=\overrightarrow{AB}\), \(\vec v=\overrightarrow{AD}\) et \(\vec w=\overrightarrow{AE}\), on a :

\[\overrightarrow{AG}=\vec u+\vec v+\vec w,\qquad \overrightarrow{CF}=\vec w-\vec v,\qquad \overrightarrow{CH}=\vec w-\vec u.\]

Ces trois vecteurs de base étant orthogonaux deux à deux et de même norme \(a\), on obtient :

\[\begin{aligned}\overrightarrow{AG}\cdot\overrightarrow{CF}&=\|\vec w\|^2-\|\vec v\|^2=a^2-a^2=0,\\\overrightarrow{AG}\cdot\overrightarrow{CH}&=\|\vec w\|^2-\|\vec u\|^2=a^2-a^2=0.\end{aligned}\]

Les vecteurs \(\overrightarrow{CF}\) et \(\overrightarrow{CH}\) ne sont pas colinéaires puisque les points \(C,F,H\) ne sont pas alignés. Les conditions de perpendicularité au plan sont donc remplies.

\(\boxed{(AG)\perp(CFH)}\).

Parcours Maths Maroc — Professeur Hammou Boudraa

Commentaires